Commercial car body grey electrophoretic paint
Product Introduction :
| HLS-5702LB/HLS-5780 Gray Cationic Epoxy Electrocoat for auto is the 7th generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. in cooperation with Germany HS International Chemical Industry Group. |
| It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc |
This product features shown below:
| Strong anti-corrosion properties, good salt spray resistance workpiece edge |
| The bath has strong anti-shrinkage and anti-pollution ability |
| Good stability of bath can adaptable for a longer updating cycle |
| suitable for auto body industry, such as cars, SUV and other models |
Main ingredients :
Matrix resin: Acrylic modified epoxy resin
Neutralizing agent: organic acid
Curing agent: Fully enclosed multi isocyanate
Additives: surface active agent, prevent shrinkage cavity agent
Product quality data:
| Project | Technical data | Test standard |
Resin
(HLS-5702LB) | Grey Paste (HLS-5780) |
| pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
| Conductivity | 25℃, μs/cm | 1100±400 | —— | HG/T 3334 |
| Appearance | —— | Milky white liquid | Grey viscous liquid,no agglomeration | Visual |
| Storage stability |
No stratified state, and there were no obvious difference compared to before storage | In 5-35 ℃ temperature 1 year |
Note: pH, conductivity measurement in the resin/pure water = 1:1 dilution
Specification statement:
This manual contains information and recommendations are based on our current knowledge and experience, accurate to the date of publication so far. It cannot be used as a guarantee or commitment, in any case, responsibility for users to decide on the use of this product is intended availability. We remain in the process or new development within the scope of the right to change product specifications. Because we cannot control the construction conditions, hope through customers own experiments to determine satisfaction with the final results.
If you want to learn more about HLS coating products, please contact Sales Department of Shanghai HLS now
